氧化物纤维/氧化物陶瓷基复合材料研究概述

氧化物纤维，氧化物陶瓷基复合材料可以在高温氧化环境下长时间工作，是最有发展潜力的高温结构陶瓷材料之一。决定氧化物纤维，氧化物陶瓷基复合材料性能最主要的2个因素是氧化物纤维的性能和界面材料的组成与结构。笔者介绍了氧化物纤维和界面材料的发展，以及界面材料涂覆方法，并探讨了氧化物纤维，氧化物陶瓷基复合材料的发展趋势。     

基于Eclipse的嵌入式集成开发环境的研究与实现

为简化嵌入式开发的流程,提高程序开发效率,通过对各类平台上通用的开发环境的研究和分析,基于MIPS架构、龙芯3A目标机上嵌入式操作系统和集成开发环境的研发项目,在x86宿主机上设计并实现龙芯3A平台的交叉编译开发环境.将开发过程中需要使用的编译、调试等功能以插件形式嵌入开发环境中,提出改进编译和工程管理的方法并予以实现,使得应用程序能够在目标机上运行和调试,提高了开发效率.     

基于物联网电梯接口协议关键技术研究及应用

针对当前不同电梯厂家提供的接口协议不同,电梯监测和管理不统一的状况,提出了基于物联网电梯通用接口协议转换装置这一关键技术.该技术的提出,可以实时在线监测电梯设备运行状态和故障情况并实现预报警作用,解决电梯接口协议之间的转换,实现电梯信息传输自组网功能,有助于电梯监测、管理一体化平台的建设.     

Relationship Between Interfacial Water Layer Adhesion Loss of Silicon/Glass Fiber-Epoxy Systems: A Quantitative Study

Water at the polymer/substrate interface is often the major cause of adhesion loss in coatings, adhesives, and fiber-reinforced polymer composites. This study critically assesses the relationship between the interfacial water layer and the adhesion loss in epoxy/siliceous substrate systems. Both untreated and silane-treated Si substrates and untreated and silane-treated E-glass fibers were used. Thickness of the interfacial water layer was measured on epoxy/Si systems by Fourier transform infrared-multiple total internal reflection (FTIR-MTIR) spectroscopy. Adhesion loss of epoxy/Si systems and epoxy/E-glass fiber composites was measured by peel adhesion and short-beam shear tests, respectively. Little water accumulation at the epoxy/Si substrate interface was observed for silane-treated Si substrates, but about 10 monolayers of water accumulated at the interface between the epoxy and the untreated Si substrate following 100 h of exposure at 24 °C. More than 70% of the initial epoxy/untreated Si system peel strength was lost within 75 h of exposure, compared with 20% loss after 600 h for the silane-treated Si samples. Shear strength loss in composites made with untreated E-glass fiber was nearly twice that of composites fabricated with silane-treated fiber after 6 months of immersion in 60 °C water. Further, the silane-treated composites remained transparent, but the untreated fiber composites became opaque after water exposure. Evidence from FTIR-MTIR spectroscopy, adhesion loss, and visual observation strongly indicated that a water layer at the polymer/substrate interface is mostly responsible for the adhesion loss of epoxy/untreated siliceous substrate systems and epoxy/untreated glass fiber composites and that FTIR-MTIR is a viable technique to reliably and conveniently assess the adhesion loss attributable to water sorption at the interface.     

Advancements in the design and validation of an air pollution integrated assessment model for Spain

This paper describes the design and application of the Atmospheric Evaluation and Research Integrated model for Spain (AERIS). Currently, AERIS can provide concentration profiles of NO₂, O₃, SO₂, NH₃, PM, as a response to emission variations of relevant sectors in Spain. Results are calculated using transfer matrices based on an air quality modelling system (AQMS) composed by the WRF (meteorology), SMOKE (emissions) and CMAQ (atmospheric-chemical processes) models. The AERIS outputs were statistically tested against the conventional AQMS and observations, revealing a good agreement in both cases. At the moment, integrated assessment in AERIS focuses only on the link between emissions and concentrations. The quantification of deposition, impacts (health, ecosystems) and costs will be introduced in the future. In conclusion, the main asset of AERIS is its accuracy in predicting air quality outcomes for different scenarios through a simple yet robust modelling framework, avoiding complex programming and long computing times.     

IDE驱动程序分析及SATA驱动程序移植

SATA硬盘已经是目前多媒体应用中被广泛使用的存储介质, 而有些多媒体产品的Linux版本中, 并不支持SATA驱动框架。本文通过对Linux下IDE驱动框架及其相关的Linux驱动代码的分析, 提供了一种在IDE驱动程序框架下移植SATA驱动程序的方法。最后以SiI3512为例, 介绍了SATA驱动程序的移植过程。对于其它此类系统的移植具有很好的借鉴作用。     

The viscoplastic properties of crude oil-water interfaces

The breaking of water-in-crude oil emulsions is a major challenge in the conventional petroleum industry, while oil-in-water emulsions present similar issues in commercial oilsands extraction processes. The stability of these emulsions can be attributed to complex rheological properties of the crude oil-water interface. Novel micromechanical techniques are developed that allow direct measurements of interfacial behaviour of emulsion drops. In these techniques, individual emulsion drops are elongated using micropipettes, where one micropipette is shaped into a cantilever for force measurements. As such, the surface behaviour of a drop is recorded in stress-strain experiments. In an alternative technique, the extended drop is released from a micropipette, and its natural, tension-driven relaxation is observed.The surface behaviour of bitumen (a heavy crude oil) emulsion drops in aqueous environments, that include dissolved calcium ions and suspended montmorillonite clays, is studied. The plasticity and other surface properties of these bitumen drops are discussed. A simple, lumped-parameter model is developed to describe the recovery of a bitumen drops to their final non-spherical shapes.     

《计算机接口编程技术》教学改革的实施研究

《计算机接口编程技术》是我系重要的一门专业基础课,本文主要阐述了该门课程在教学内容、教学方法与手段以及课程考核方式改革中的具体实施情况以及存在的创新点。     

基于TMS320VC5402的RS_485通信设计

完成了基于TMS320VC5402 DSP的R5_485通信的硬件设计和软件编程.基于美国TI公司TMS320VC5402 DSP芯片的多通道缓冲口(McBSP)进行适当的硬件扩展,以SPI方式直接和MAXIM公司的MAX3100通用异步串行收发器接口,然后经Linear Technology公司的LTC 1480超低...